Luffy Clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Onepiece luffy clock printed in color, the color change of the printer can also be used, it does not require AMS or MMU,
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 51
- Makes
- 0
- Views
- 525
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
3D MODEL DESCRIPTION
Onepiece luffy clock printed in color, the color change of the printer can also be used,
it does not require AMS or MMU,
in the slicer program set the color change to the recommended height.
add a negative cylinder(8mm) to the Centre of the clock to create the correct size hole for your movement or alternatively drill the required size hole.
this is the mechanism I used: https://amzn.to/49jUvUC
3D PRINTING SETTINGS
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Red
At layer #3 (0.32mm) swap to Black
At layer #9 (0.8mm) swap to Blue
At layer #10 (0.88mm) swap to Orange
At layer #13 (1.12mm) swap to White for the rest.
if you want to change the color of the numbers and border make another color change
If re-scaling model make sure not to alter the Z height of the model