1 / 4
Star Wars - Jedi Holocron
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Star Wars - Jedi Holocron LED-Lamp
- Rating
- 5 / 5
- Likes
- 217
- Downloads
- 523
- Makes
- 8
- Views
- 2,819
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bill of Material
- 11 sidewalls
You can choose between 6 different elements.
All elements can be mixed up with each other. - 11 panes
You can choose between clean and embossed panes
Please use translucent filament! - 1 bottom element
- 1 closure cap
In addition you will need
- 1 LED light (diameter up to 7 cm)
I used this LED light from Amazon, which is equipped with color change and remote control: https://www.amazon.de/dp/B0BVBCDB37?psc=1&ref=ppx_yo2ov_dt_b_product_details - glue, to glue the panes in the side walls
Print parameters:
- Layer height: 0.2
- Nozzle: 0,4 mm
- Supports: No
- Brim: No
- Material: all
The uploaded example is printed with PLA filament in bronze and translucent blue from “Das Filament”
I would be very happy about a make, a like or a comment!
MAY THE FORCE BE WITH YOU!