1 / 1
Replacement Shade/Blind Drive Rod/Twister
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple shade/blind rod for opening and closing your blinds
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Our house was missing a drive rod for one of our blinds, so after about a minute in OnShape this is the simple fix I cam up with.
I recommend printing in PETG for its flexibility. Print with a wide brim to keep it from falling over.
Rod height is 253 mm.
Printed on a Bambu Lab X1C. Speeds were set at a conservative 80mm/s.