1 / 3
TP-Link Tapo C100/C110 Enclosure držák/mount/holder — image 1
1 / 3

TP-Link Tapo C100/C110 Enclosure držák/mount/holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

CZ: Držák kamery TAPO C100/110 pro orig. Průša Enclosure EN: TAPO C100/110 camera holder for original Prusa Enclosure

Rating
0 / 5
Likes
9
Downloads
46
Makes
0
Views
837
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

CZ: Držák pro kameru TP-Link TAPO C100/110/111
EN: Mount for cam TP-Link TAPO C100/110/111

pohled z kamery na držáku / view from camera on mount:

 

Montážní materiál/Mounting material

2x imbusový šroub M3x8 / hex screw M3x8
2x matice M3 / nut M3
(stejné jako pro montáž Enclosure/same as for Enclosure assembly)

 

Monáž/Assembly

1.Demontujte z kamery podstavec - šroub (1) a (2) 
1.Remove the stand from the camera - screw (1) and (2)

2. Demontujte kulový čep - guma (3) a šroub (4)
2. Remove the ball stud - rubber (3) and screw (4)

3. Do vytisknutého držáku vložte 2x matici M3 (5 + 6)
3. Insert 2x M3 nut (5 + 6) into the printed holder

4. Namontujte kameru na držák a upevněnte pomocí šroubu (7) odmontovaného v kroku 4
4. Mount the camera on the bracket and secure with the screw (7) removed in step 4

5. Namotujte držák i s kamerou do Enclosure pomocí šroubů M3x8 (8+9) a zapojte napájecí kabel (10)
5. Mount the camera holder in the Enclosure using M3x8 screws (8+9) and connect the power cable (10)

 

6. Hotovo!
6. Enjoy!

 

Doporučené nastavení tisku/Printing recomanded settings

Material: PETG
Layer: 0.2mm
Perimeters: 2
Solid layers - top/bottom: 8
Infill: 100%
Supports: For supports enforces only

 

Doporučená pozice tisku/Printing recomanded position

Doporučené nastavení supportů/ Support recomanded settings

potřebné pouze pro označená místa/ needed only in marked places

Tags