1 / 2
Lamp Shade with Diffusor for E27 Socket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3 Part Lamp for E27 Socket/Light bulb
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 145
- Makes
- 0
- Views
- 1,197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Lamp consists of 3 parts:
- Lamp Base
- printed in reflective color (I used silver, white should work fine too)
- Lamp Shade
- its printed in vase mode to get rid of the seams
- printed with 0.6 nozzle for increased thickness
- print in any color your like
- Lamp Diffusor
- its also printed in vase mode
- use 2 or 3 bottom layers depending on your preference
- print in transparent or white for best light diffusion
I printed all three parts in PLA
I used these E27 Sockets: Amazon (Affiliate Link)
and these Light Bulbs: Amazon (Affiliate Link)
Should work fine with every other E27 bulb.
Assembly Guide:
- Unscrew the E27 Socket
- Slide the Shade over the Base and insert it into the Socket
- Screw the Socket-Nut back on
- Install Light bulb
- Push Diffusor into place
Have fun!