1 / 6

Climbing express cliping remote stick

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remote clip device using basic material that you can found in your local do-it store

Updated at source: Jul 24, 2021

Model information

New version available, see website:

------------------------------------------------------------------------------------------------

Build your own remote clipping stick !

Compatible will multiple express brand, see pictures

Stick is based on a pool telescopic stick from Planet Pool for the 3 firsts tubes :

https://www.jumbo.ch/fr/manche-telescopique-aluminium-5491?sku=1096044

And a 20mm diameter PVC tube for the 4th tube

Compatible the the Beta BrushStick, use the dedicated adaptor

Assembly procedure:

1/ Reduce the length Cut the planet pool tube (mine is cut a 90cm)

Warning, for the smallness tube, cut on the side with the “cap”. It have to be removed

2/ cut the PVC tube at the chosen length pool stick +2cm

3/ Print and assemble the bar connector 25 to 20mm

4/ Print and assemble the express support with the adaptor. You will need a M4x12 screw and bold for strong assembly.

5/ Put the clip at the correct height compatible with your express

6/ Assemble the express support on the stick

7/ Enjoy your climb !

Demo here:

Print parameters:

PETG / 0.2mm / no support