1 / 3
120mm to 92mm PC case fan adapter — image 1
1 / 3

120mm to 92mm PC case fan adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Use 92mm fans in a 120mm fan cutout!

Rating
4 / 5
Likes
24
Downloads
254
Makes
1
Views
1,579
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to use a 92mm fan in a computer build but there were no screw holes for it so I made this.

Print at 0.2-0.28 layer height, recommended to use 3 walls, 3 top/bottom layers, and 15-30% infill but you can probably get away with less. I used PETG. Im sure PLA would work but I was worried about it getting soft in a toasty computer case.

The screw holes are small and are designed to allow the fan screw to cut its own thread. Fan should be screwed in on the flat side as shown in image 2. 

2 versions available, one has less surface area and decreases print time/material usage bya a substantial amount :)

Tags