1 / 3
RatRig Toolhead 2.0 IDEX
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
IDEX version of the RatRig toolhead, featuring changes so it can accommodate the IDEX version of the Toolhead 2.0
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 58
- Makes
- 0
- Views
- 1,397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
RatRig Toolhead 2.0 IDEX version:
Changes to the toolhead to accommodate the IDEX version of V-Core 3.1.
Changes:
Left:
- Switched the Toolhead default probe to the right side (needed for the IDEX and Klipper configuration)
- Removed the left belt tensioner as it is not needed
- Added some minor clearances
- Extended the probe thickness for the Heat Insert as it is in the updated version
Right:
- Removed left belt holder
- Moved the right belt holder to be at the bottom
- Inverted the belt tensioner so it fits the idex system
- Removed the upper tensioner, and added spacer for the upper belt to go to the left toolhead
- Added clearance for the Rapido wiring Mirrored the Probe holder to the left side, as it is originally in the Toolhead 2.0
- Mirrored the Endstop part of the mesh so it can fit the right toolhead
- Added clearance for the bolts of the metal plate, as it is different left and right
- Added more ziptipe holes
Right - No Probe:
- Simplifed the right toolhead without the mount for the Probe