1 / 3
RatRig Toolhead 2.0 IDEX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IDEX version of the RatRig toolhead, featuring changes so it can accommodate the IDEX version of the Toolhead 2.0
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 1397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (23)Powiązane
RatRig Toolhead 2.0 IDEX version:
Changes to the toolhead to accommodate the IDEX version of V-Core 3.1.
Changes:
Left:
- Switched the Toolhead default probe to the right side (needed for the IDEX and Klipper configuration)
- Removed the left belt tensioner as it is not needed
- Added some minor clearances
- Extended the probe thickness for the Heat Insert as it is in the updated version
Right:
- Removed left belt holder
- Moved the right belt holder to be at the bottom
- Inverted the belt tensioner so it fits the idex system
- Removed the upper tensioner, and added spacer for the upper belt to go to the left toolhead
- Added clearance for the Rapido wiring Mirrored the Probe holder to the left side, as it is originally in the Toolhead 2.0
- Mirrored the Endstop part of the mesh so it can fit the right toolhead
- Added clearance for the bolts of the metal plate, as it is different left and right
- Added more ziptipe holes
Right - No Probe:
- Simplifed the right toolhead without the mount for the Probe