1 / 4
Magnetic screw holder (drill / screwdriver)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic screw holder (drill / screwdriver). Simple and fast print with no supports needed.
- Rating
- 5 / 5
- Likes
- 207
- Downloads
- 466
- Makes
- 5
- Views
- 3,280
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic screw holder (drill / screwdriver).
Simple and fast print with no supports needed.
- 8 minutes model printing time (on Bambu), without supports. PLA works fine.
- Holds the screw in position when using the drill/screwdriver
- Automatically release at the end
- Adds magnetic feature to the screwdriver/screw drill bit
What you need:
- a magnet of 7mm diameter and 1-2mm thickness.
- 2gr. of red filament …. kidding :))
Making process:
- This is designed to be used with a small magnet: 7mm diameter and 1-2mm thickness.
- The diameter of the screwdriver / drill bit is 10mm ( tested by me on 10mm, but should work even if it's not tight; this is supposed to move freely )
- print as in the picture, flat, no supports are needed. No special requirements. I used 0.2 layers, but you can go even 0.1mm if you want as the part is so small and fast to print.
- Use a drop of glue or hot gun silicone to fix the small magnet.