Hand Drill Spirit Level
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.47 – €0.57 net (excluding VAT)
For file: Hand Drill Spirit Level_Adapter_od43_id36_0.2mm_PETG_MK3S_34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.52 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 33.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
And you will never drill crooked holes again
- Rating
- 0 / 5
- Likes
- 140
- Downloads
- 206
- Makes
- 0
- Views
- 2,120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hand Drill Spirit Level
With this handy and low-cost device, you can check the degree of inclination while drilling a hole. With the two bubble spirit level, it works for horizontal and vertical drilling.
The Hand Drill Spirit Level not only helps to work more accurately, but can also protect the drill bit from jamming and prevents the hand drill from twisting.
It is independent of the drill bit size and you can still use the full length of the drill bit.
The first model is designed for an mounting diameter of 43mm e.g as on the Bosch PSB 750 RCE.
With the Adapter OD43-ID36 it is suitable e.g. for the Einhell TE-HD18Li Concrete Hammer.
“Just let me know what diameter your machine needs, I will try to add an adapter or upgraded design for it.”
BOM:
| Pos | Qty | Name | Material |
| 1 | 1 | Printed Power Hand Drill Level Gauge | PLA/ PETG |
| 2 | 1 | Circular Bubble Spirit Level OD15x8 | ebay |
| 3 | 1 | Cylidrical Bubble Spirit Level OD10x30 | ebay |
| 4 | 1 | ISO 4014 - hexagon head screw with shaft M8x70 | steel 8.8 |
| 5 | 1 | ISO 4033 - hex nut M8 | steel 8 |
| 6 | 1 | Printed Handel for M8 bolts | printables.com |
| 7 | 1 | Printed Adapter as needed | PLA/ PETG |
Printing Instruction:
- Material: PLA/ PETG
- Layer Hight: 0,2mm
- Infill: 20%
- Perimeter: 3
- Support: No
Add a stop at 17mm to insert the circular bubble spirit level and a stop at 31mm to insert the cylindrical one.
A big thank you to everyone that likes, downloads and collects, it would make my day if you upload your make! 😃