Voron AFTERBURNER Clockwork 1 to PANDA MINI
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This revision to a Voron Clockwork extruder will allow it to be fastened to the X1 Hotend Mount of a Panda Mini.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 378
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Print this part as replacement main body for a Voron Afterburner extruder, in heat resistant filamant. I believe the original extruder is a Clockwork “1”
I used PC, but ABS would be great. There are three holes in a triangle formation on the bottom. Add M3 heat inserts to the outer holes. Build Voron Afterburner extruder as per Voron instructions. Screw it onto Panda Mini hotend mount with M3 X 8mm screws.
You will probably need a short length of PTFE tubing, say 19mm, to bridge the gap between the extruder and the hotend (again as per Voron guidelines)
When I tried assembling the extruder I found that the motor plate fouled the toolhead mount, so the revised MOTOR MOUNT shaves a bit off the bottom to provide a better fit