Voron AFTERBURNER Clockwork 1 to PANDA MINI
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This revision to a Voron Clockwork extruder will allow it to be fastened to the X1 Hotend Mount of a Panda Mini.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Print this part as replacement main body for a Voron Afterburner extruder, in heat resistant filamant. I believe the original extruder is a Clockwork “1”
I used PC, but ABS would be great. There are three holes in a triangle formation on the bottom. Add M3 heat inserts to the outer holes. Build Voron Afterburner extruder as per Voron instructions. Screw it onto Panda Mini hotend mount with M3 X 8mm screws.
You will probably need a short length of PTFE tubing, say 19mm, to bridge the gap between the extruder and the hotend (again as per Voron guidelines)
When I tried assembling the extruder I found that the motor plate fouled the toolhead mount, so the revised MOTOR MOUNT shaves a bit off the bottom to provide a better fit