1 / 2
Expandable Steel Sheet Holder for Prusa Enclosure — image 1
1 / 2

Expandable Steel Sheet Holder for Prusa Enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified version of Whity's expandable steel sheet holder for mounting on the side of the Original Prusa Enclosure.

Rating
4.895 / 5
Likes
73
Downloads
280
Makes
20
Views
1,790
Reviews
19

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Remix for installing Whity's Steel Sheet Holders on the side of the Original Prusa Enclosure. Only for MK sheets.

You only need to print one of each part. If you need more holders, rest can be original unmodified versions.

Print instructions

Print settings are same as in original model.

Original instructions when I made this remix:

Print with 0.2mm layer height. No supports needed.

  1. Rotate the side parts 50° to fit on the print bed.
  2. Adjust the "Fill Angle" by 50° too

Assembly Instructions

Remove 4 x nylon rivets holding the clear panel to the frame.

From inside, insert M3x6 and M3x12 screws and fasten them to M3 nuts in printed parts (see photo).

 

Update 10.2.2024

New version for mounting on the bottom of the enclosure. Sheets are accessed from the side of the enclosure. Mounting with 4 x M3x6 and 4 x M3 nuts.

Tags