1 / 2
Quick Release PSU and Keystone Outlet for DIY Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nice looking outlets for your DIY Printer Enclosure.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 433
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Nice and tidy solution to route your cables from inside to outside the enclosure.
One outlet is for the original Prusa quick release PSU cable.
If you want to crimp your own Quick Release Cable follow this thread for the parts you will need.
https://forum.prusa3d.com/forum/user-and-hardware-mods/psu-quick-release-for-mk4/#post-669564
The other can take two keystone modules.
The provided parts are designed for 6.5mm wall thickness, but you can modify them by the provided step files.
The back plate needs six 3x5x4 heat inserts.
Happy Printing!