1 / 4
Corner Drill Guide - Imperial/Metric with Interchangeable Inserts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable drill guide for repeatable holes. - Added metric version
- Rating
- 5 / 5
- Likes
- 76
- Downloads
- 203
- Makes
- 1
- Views
- 1,198
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
***Added Metric (cm) version step file - May 2025
What you should know before printing:
- The inserts fit TIGHT. That is intentional, and you may have to play with your horizontal expansion a bit if it's too tight. My X1C nailed the sizing. Your mileage may vary.
- The actual drill holes in the inserts are a bit under-sized so you'll need to run the appropriately sized bit through for a clean fit. This is also intentional.
- When removing the inserts, push from the top of the cylinder to avoid snapping it.
- There is a blank .STEP file of the insert if you want to make another size. Or ask me and I can.