1 / 2
Silicone Mat Work Light
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model adds a light to your silicone work mat, it makes use of the part trays and a cheap joby style tripod.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 24
- Makes
- 0
- Views
- 429
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Silicone Mat Work Light v1
This simple model adds a light to your silicone work mat, it makes use of the part trays and a cheap joby style tripod shoe.
My part tray dimensions were 41 x 35 x 12mm.
Materials
- Silicone work mat
- Example tripod (you can get these for much cheaper)
- M4 x 12mm nuts and bolts
- M3 x 8mm nut and bolt
- Phone ring light (82mm ⌀)
Assembly Instructions
- Insert an M4 x 12mm bolt in the bottom of the base print with an M4 nut inserted in the slot at top of the print.
- Disconnect a section of one of the tripod legs and drill a 4mm hole, place it over the bolt and added another M4 nut to secure.
- Disconnect the tripod shoe and and drill a 3mm hole, insert a M3 nut in the light body and screw the shoe and light body together.
The diffuser is optional depending on how bright your light is. I desoldered the ring light from the small circuit board and am powering it directly from my bench power supply.