1 / 8
Creality Sprite Extruder Generic ADXL345 / BTT ADXL Bracket — image 1
1 / 8

Creality Sprite Extruder Generic ADXL345 / BTT ADXL Bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Generic ADXL345 / BTT ADXL brackets for a Creality Sprite Extruder, standard or pro.

Rating
5 / 5
Likes
14
Downloads
138
Makes
1
Views
1,344
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Printed as oriented. Sliced in PrusaSlicer with Organic supports enforced under the whole bridging area to insure tolerances maintained.

All holes are sized for no-insert M3x8 use.

2x M3x8 screws needed to mount either type of ADXL to bracket.

1x M3x8 screw used on left side of extruder to temporarily replace stock Sprite fan/ABL holder screw for solid mounting. Extruder stock M3x6 round-head screw moved to right side while mounted for measurement. Don't overtighten, you can damage / strip the threading out of the aluminum stepper body.

Klipper: Check MEASURE_AXES_NOISE is within range once mounted to the extruder. You may need to temporarily unplug the stock 3010 hot-end cooling fan while measuring to reduce noise (*). 

Use a suitable binder clip to attach to the bed while measuring Y.

 

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

Yes

Resolution:

0.20

Infill: 

10% Grid

Filament: Overture PETG Black

 

* If your stock hot-end cooling fan is loud/vibrates badly the Winsinn GFAN301024VB is a functional almost drop-in replacement. You will need to replace its JST-XH plug with a JST-PH. Recommend making the wiring as close to the same length as on the stock fan as possible, there's not really anywhere in there to store extra. Note: not sure on CFM/mm³ difference, Creality doesn't publish specs on fans. Do a hot-end PID retune after swap.

 

Category: 3D Printer Parts

Tags