TomTom Rider 500 Full Motorcycle RAM Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All the parts you need to mount your TomTom Rider on a motorcycle.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 81
- Makes
- 0
- Views
- 960
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- GNU General Public License v2.0
Since I now have my third motorcycle and didn't want to buy another ridiculously overpriced mount from TomTom, I simply searched what 3D models are already available.
The mount is attached to my Royal Enfield Himalayan and holds surprisingly well. Ignore all the grease on the Enfield... that serves as corrosion protection since it's my winter motorcycle
The battery of my Rider 500 lasts about 6 hours, so a power supply is not necessarily required.
I printed with PETG, 5 perimeter and 50% infill (Gyroid).
I recommend using poor print settings! The surfaces should be rough, then the mount holds better. In my first attempt with my Bambulab p1p, the quality was too good so the surface was too smooth. So, if you have an Ender 3 laying around, it's better to use that instead...
If the “tomtom-rider-rammount” does not fit for you, you can edit the scad file with openSCAD.
You need:
1x M6 + nut
2x M4 or M3 + nuts
Original parts:
https://www.thingiverse.com/thing:4564250
https://www.thingiverse.com/thing:1789303
https://www.thingiverse.com/thing:3679427