Counting matching models…
This insert goes into the TomTom port on your dash, if equipped. Most 2013+ models had the tomtom port (for the OEM navigation). I ordered an automatic closing Cell phone holder from amazon, link below and simply mounted the end of it to…
sunscreen found on Tingiverse for my motorbuddy.
Raincover for the TomTom Rider mount to protect the vulnerable contacts. Suitable for Tomtom Rider 40/400/410/420/450/550. This is a remixed version of https://www.thingiverse.com/thing:3105036 . This remixed version is sturdier and made…
ReadMe.txt Schutzkappe fuer TomTom Rider 4xx Anwendung: Regenschutz für Ladehalter der TomTom Rider 4xx Serie Dank an: JordanAltena https://www.thingiverse.com/thing:2819259 Stueckliste: 1 Stueck Schutzkappe V04 Einschraenkung: keine…
This model is made to be printed with flexible material. I used TPU and it fit well the device. No support needed, just print it as it is oriented in the STL. Enjoy your ride and be safe!
So I bought TomTom Rider 400 and had it sent to me. When I received it, I noticed that the power button is broken
This is a ball/socket mounting plate for a TomTom GPS. It was designed to be compatible with most TomTom GPS products. There are two types of mounts: A ball mount, for mounting your TomTom into a ball socket. A threaded socket mount with…
Clips onto the back of the following tomtom models: START 42, START 52, START 62, VIA 52, VIA 53, VIA 62 The model obviously just provides 4 screw holes and not a ball mount, this is because you also need to print this model…
For TomTom with ball mount e.g. TomTom Go 500 etc. If your suction cup no longer holds onto the windshield (my situation), you can use this. Much more durable and cheaper :) Depend of the mounting place use appropriate model. 3mf file…
TomTom Mounting Bracket KTM 990 SMR / SMT (maybe others too) for TomTom Rider 400/450/500/550 series …some screws 'n nuts needed… Handle bar diameter 28mm Show me your makes !!! Yes it's hard to print but unbreakable ....
Raincover for the TomTom Rider mount to protect the vulnerable contacts. Suitable for Tomtom Rider 40/400/410/420/450/550. This is a remixed version of https://www.thingiverse.com/thing:3428080 I have adjusted this version so that it is…
Simple adaptor plate to use the rear of the BMW navigation cradle with the fitting bracket for a Garmin, TomTom or other standard four-screw mount
A friend had a bit of cardboard taped over the top of his GPS unit to stop the glare from his steeply sloping windscreen. I figured there had to be a better way! This cover slips nicely on top of the TomTom device and all buttons and…
While the TomTom Rider is an excellent sat-nav on my bike, I've been increasingly using Calimoto for rides when I just want to enjoy myself and discover new roads (it's a great app and it's free to try). This adaptor is available with or…
Tomtom Rider 500/550 GPS adapter for phone holder
Since I now have my third motorcycle and didn't want to buy another ridiculously overpriced mount from TomTom, I simply searched what 3D models are already available. The mount is attached to my Royal Enfield Himalayan and holds…
Basically the same as the original, but with a long mould for not pushing onto the contacts, when cap ist on.... and maybe a bit thicker, to sink a TomTom Logo 0.5mm deep into the bottom. ;) TomTom Logo can be taken from Wikipedias TomTom…
Another TomTom Rider stand . I have made it for my TomTom Rider 550. I think it can be used also for 4xx model. This model is a work in progress. I want add 2 pin (pogopin?) for power up. Category: Other
This is a two-part 3D-printable holder that accepts the original TomTom magnetic car mount (the small magnetic plate that comes with the Tom device) and clamps onto a car air vent. It lets you avoid sticking the magnetic base to your…
support for tomtom xl, with module to use as an alternative also any type of mobile phone, designed and printed for a friend with a Bmw GS motorcycle but I think it can also go for other motorcycles that have a tubular between 11 and 13…
This is a little stand that goes in the original TomTom port of 2013+ era Fiat 500's. I designed this to better place my small garage door opener since I lost the clip for it. It fits a chamberlain/liftmaster 3-button remote and if you…
Single part with standard RAM ball and tomtom handle on the opposite side
My dad needed an adapter plate so he could use his TomTom Rider 500 motorcycle GPS in the car. This thing was almost perfect. Designed to fit a phone holder i had lying around that had a 17.2mm ball instead of the 17mm of the original.…
Attach your TomTom GO using this and a M5 Screw. There's a 25mm thread long M5 thread in the adapter, try to use a screw that uses most of it, to massively decrease the chance of failure. Tested with TomTomGo Expert Camper Max and Start…
A compact solution for fastening a TomTom Rider active base to a common 22mm diameter bracket on my wife's Honda Transalp XL 750. Note: Due to size limitations the base is rotated by 90°. It hasn't been any problem, because the mount…
no a la venta Adaptador para BMW R1200 R1250GS se agradece que dejen un comentario con fotos y se añada a me gusta.
Simple TomTom RIder 400 box Category: Tool Holders & Boxes
Rubber part of TomTom holder ball joint failed. It is just a hollow sphere. With a bit of trial and error printed the right size from TPE/TPU. TomTom won't fall out anymore and can be positioned again. Print with the open side down in a…
My bike is Ducati MTS GT 2020, I'm 185cm tall, this is relevant to the parts where I talk about seeing the instruments and gps displays, your experience will vary based on your bike and height, download the Fusion project and adjust to…
Impression en PETG avec supports pour surplombs >45°; Remplissage 30%; coque épaisseur mini 2mm; Parois verticales 5. Un petit coup de papier de verre pour quelques imperfections, de la patience… Je joins le fichier F3D pour vos…
Description Use Case I remixed this GPS support model so that it holds on a Ø12 mm tube. Be careful to take a break during printing to slide the nuts that will be held in place during tightening. Hardware need: 2 Vis CHC M8x25 2 M8 brake…
starwars like snile kangaru hybrid HORSE Have Fun
Ständer für TomTom Rider 4x0 / 5x0 Ich habe diesen Ständer entworfen, um mein TomTom Rider 400 bequem am Schreibtisch nutzen zu können – beim Planen von Routen, bei System-Updates oder einfach zum Laden. Wichtig war mir dabei, dass das…
Halterung für TomTom Rider 500/550 an einer Tenere XT 660 Z. Durchmesser 16 mm Stangen.
SUPPORTO GPS TOMTOM X MOTO Realizzato:www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 Nozzle: 0,8 Temperatura di Stampa: 205° Temperatura Piatto: 60° Riempimento: 20% Filamento: PLA XINGTONGZHILIAN
für TOMTOM GO 5200 und GO 6200 Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Doesn't Matter Category: Automotive
Jest to osłona słoneczna w pozycji pionowej
Dieser Adapter ersetzt die originale Saugfußhalterung des TomTom Rider 400. Zusätzlich wird ein M4 Gewindeeinsatz zum einschmelzen sowie eine flache Schraube benötigt. Das Bauteilmuss gegebenenfalls so nachbearbeitet werden, dass das es…
2023.04 update: the holes for the gopro mount apparently created a stress-riser or something and the mount snapped off, I'm pretty sure glueing it on would work (and will likely repair mine with glue unless I decide to mount the gopro…
I liked the original idea and make of this adapter - but did not want to have my phone sit on top of the adapter itself. I have a quad lock mounted beside the Tomtom rider connector; therefore I just wanted the USB connection to be…
Use this plate to easily mount a TomTom in place of a Garmin on your BMW R1200GS or R1250GS. Will likely also work on the BMW S1000XR and other motorcycles with the sat-nav mounted in the same way.
Model already oriented for printing You can add a color to the logo layer just like I did
Every now and then I ride with Navi (TomTom Rider 550) on my KTM SMC-R (2019) Unfortunately, the original TomTom mount looks really shitty and is also very high. I'm also too lazy to unmount them completely every time I drive without the…
22mm TomTom Rider 40 mount kit If your RAM mount comes to far up your face on your Honda Varadero This allow you to flat-mount a regular 30x38 pattern tomtom ( Rider ) 40 on any bar. ( i use a piece of 22mm pipe , as i am to cheap to buy…
TomTom GO 5200 incl. Accessories Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Doesn't Matter Category: Automotive
Remake to optimize design and get more current out of the adaptor for charging. Electronics are described here: Simple way to use USB Type-C to get 5V at up to 3A (15W) - Power - Electronic Component and Engineering Solution Forum -…
This is a mount for the TomTom rider car mount that can be attached in the ducato tablet holder instead of the standard suction cup as this fails in warm weather.
This is a ball mount to replace the TomTom Blue&Me GPS dock in Fiat 500/500e models (generally 2007-2015). You have to remove the dock from the dashboard with moderate force (or carve an identically shaped oval hole in newer/older models…
TomTom logo Keychain A simple keychain with the (2021) TomTom logo, you can print with different color, just change filament at the right height.
Remake to optimize design and get more current out of the adaptor for charging. Electronics are described here: iCharging | Minty Boost | Adafruit Learning System
Spodní část držáku Tomtom RIDER 400-550
Case for the tomtom bandit with room for a few SD carts, an extra battery and some extra's. I printed the lens cap and the case top out of TPE, but TPU or any other soft to semi soft flexable material would do. Case bottom is printed out…
A mount that adapts the TomTom GO 720 730 920 930 520 530, to fit on the iOttie Easy One Touch 4, holds on very securely. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 30% Filament:…
J'ai un Tomtom 400 avec son support moto, mais pas de support pour la voiture, alors j'ai fabriqué dans Fusion 360 un adaptateur pour un support ventouse que j'avais déjà. C'est ma première contribution, je ferais mieux pour les…
Adapter plate for TomTom Rider holder to RAM Quick-Grip phone mount Printed in ASA (UV resistant) 6,52 inch phone TomTom-MPN (Manufacturer Part Number) 9UGE.001.03 RAM-SKU: RAM-HOL-PD4238A
Halter für https://www.thingiverse.com/thing:1902514 28er Durchmesser zb Triumph Street Triple, M4 Einschmelzgewinde
Its an holder for a TomTom Rider. You also need an M12 x 300mm DIN931 Screw, a M12 Washer and a M12 Lock Nut. Category: Automotive
Ein Ballmount fürs Mopped
The Mount consists of two parts, the main body and the Mountingplate which interlock with a dovetail. I printed this Mount on a Prusa Core One, with PETG. To properly attach the Mount to the Skadis Board, the T-Clips by Line Arc Line are…
my original mount broke so i designed this one
Here is my slide on/off sun shade for my TomTom Go Expert 7" Designed to slide on and off. I scanned my TomTom and created this shade in fusion to fit perfectly around the screen. Printed in ASA on Anycubic S1 Be sure to add tree supports…
This filter helps immensely with keeping wind away from your bandit's mic, works surprisingly well. I've tested it on my motorcylce and i get clear motorcycle noise easily up to 100 km/h, recordings are better that what i can hear while…
This is a simple two-part 3D-printable sun visor mount for Tom by TomTom . It is designed to hold the original magnetic plate and clip directly onto a car sun visor. There is no complicated mechanism or unnecessary hardware: print both…
used to place a tomtom on a old garmin beanbag base Category: Gadgets
TomTom Assistant Sunblind Holder , Printed in PLA+ with Supports
Everything is printed in PETG , with walls 4 and infill at 30%. The base plate for the TT Rider is printed at a 45-degree angle to prevent a weak point at the bottom of the V-shape.
Support Gps Tomtom Rider 550 (j'imagine compatible avec d'autres version) pour guidon de Ducati Monster 821 de 2016 (Ø22mm). Inclinaison de 30°, il y a un peu d'espace entre la pièce de serrage de guidon et le support gps pour y passer le…
Tomtom Rider 550 mount for the Triumph Thruxton 1200 R for use with a hollow stem nut like this one https://www.probolt-germany.com/alu-honda-gabelbruckenzentrallenkkopf-mutter-10-gebohrt-ltyokeo20/ from probolt (also available from other…
Its an holder for a TomTom Rider. You also need an M12 x 300mm DIN931 Screw, a M12 Washer and a M12 Lock Nut. Category: Automotive
TomTom Assistant Sunblind Holder , Printed in PLA+ with Supports
Use case Here is my padlock for Tomtom Rider. I bought the lock on Aliexpress and changed the screws of the feed box by larger. Material need: 4 vis M5X20 1 lock:…
adapter to go from a threaded Thruxton 1200 R stem nut to a tomtom rider 550 for better central mounting Unknown what stem nut is on mine. step file is included in case you have to change it. Holes best marked and drilled rather than…
![[WIP] 2007-2015 Fiat 500 phone mount for TomTom GPS dock port](https://media.printables.com/media/prints/df94d6bf-f2f8-4195-9a34-4671b10ce52d/images/12903526_d7899dd7-839f-43c8-9111-4835c96ace4e_0ce0db86-0a00-4bd4-ade0-c95c9abef672/screenshot-2026-05-13-122656.png)
