Ingenuity Extruder for Smart Effector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the Ingenuity Extruder for the Duet3D smart effector. https://youtu.be/eI0tD69wD18 It's a direct drive…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 28
- Makes
- 0
- Views
- 513
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the Ingenuity Extruder for the Duet3D smart effector.
It's a direct drive extruder which features a hollow-shaft Nema-14 stepper motor, Bondtech LGX drive gear, an eccentric breach which is self-locking, an idler wheel where the spokes act as a tensioning spring and a hypoid bevel gear pair, archiving a gear ratio of 37:7.
The whole mechanism features only 4 moving parts: two gears, the idler wheel and the breach-lever, and it weights only 229g!
To make one yourself:
- print lowerhalf and upperhalf from FDM or SLS
- print pinion and wheel from abrasion resistant resin (Siraya Tech fast mecha white) or have it SLS printed from IGUS
- print lever and idler from standard resin
You will also need:
3x M3 square nuts and M3x6mm bolt
2x M3x50mm bolt
2x 3mmx18mm precision shaft
1x 3x4mm ball plunger (https://www.amazon.com/dp/B07HJV9FGX?ref=ppx_yo2ov_dt_b_product_details&th=1)
1x hardened drive gear from Bondtech
1x Nema 14 hollow shaft stepper (14HS13-0804SH-C4(4) from Stepper online with D-profile)
Category: 3D Printer Extruders