1 / 1
Marble Ladder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Marble Ladder makes an eye-catching desktop distraction, or a fun physics fidget.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 75
- Makes
- 0
- Views
- 453
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Filament: Designed for PLA
Infill: 5%
Layer hight: First layer 0.35mm, Remaining layers 0.3mm
Nozzle: 0.4
Nozzles temp: First layer 215c, Remaining layers 210c
Bed temp: First layer 60c, Remaining layers 60c
Supports: Yes, Rectilinear. Set overhang threshold to 2 degrees, and pattern spacing to 5mm
Print time: Approximately 10 hours and 7 minutes
Filament required: Approximately 42.15m
Works on 6 inch beds
Works on not heated beds, with the inclusion of at least a 5mm brim, and maybe some glue.