1 / 2
Drybox Dessicant Holder with 120mm Fan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A desiccant container that has a grill and is compatible with a 120mm PC fan for more effective drying.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 79
- Makes
- 0
- Views
- 602
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
BOM
- 120mm PC FAN
- Silica gel beads (diameter ≥ 1.8mm, most beads are compatible)
- 4 fan screws
Instructions
- Print as shown in the photo. Supports off for the holder; supports on for the lid. I recommend PETG.

- PETG is good because it is flexible and has very good layer adhesion. The narrow ribs are quite fragile in PLA
- PETG is also good because it is more stringy. In this model, a stringier print means the silica beads are better retained!
- I suggest doing the assembly in your drybox container, since the beads tend to spill
- Fill the holder with silica gel using a teaspoon
- Slide the lid on, as shown in the picture
- Screw the fan into the holder using the fan screws
- Over a trash can, gently vibrate the holder so that all the fractured silica particles fall in the trash rather than making a mess in your drybox