Wire loom tool - Kabelfresser Werkzeug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This wire loom tool makes inserting the wires in the corrugated tube much easier. I've provide several common size…
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 316
- Makes
- 1
- Views
- 1,717
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This wire loom tool makes inserting the wires in the corrugated tube much easier.
I've provide several common size versions, ready for direct printing.
The design was made using Sketchup. You can also download and change the skp file to meet your needs. The design in the skp file is 100mm diameter, so it needs to be scaled down. I used netfabb basic to do this, but most slicers offer some sort of scaling as well.
Print Settings
Printer:
Ultimaker 2+
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
40%
Notes:
I used 0.2 resolution, which works fine. Infill set to 40% and I used "tree support" in Cura 3.4
I printed it with the pointy tip facing up, that way very little support is required.Category: Hobby