No-Fuzz Scraper (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.76 – €4.59 net (excluding VAT)
For file: No-fuzz_scrapper_100%_0.20mm_PETG_MK3_3h30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.17 excluding VAT (range midpoint).
- Weight reported by the author
- 71 g
- Print time reported by the author
- 3.5 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The No-Fuzz Scraper!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
No-Fuzz Scraper
I started making a ice scrapper that had interchangeable blades and what not, but the I thought to myself “I'm not going to stand out in the freezing cold, looking for blades, unscrew it, changing blades… No, I want something that does the job and that I can tuck away”.
So this is what I came up with, a piece of square plastic! With some notches…
Use it however you want, just get the ice of the windshield. That's my primary goal when ice scrape my car!
I made it big enough so you can shovel away snow and there is a notch in the corner for scrapping your wiper blades. If you have a really bad morning the other corner is for crushing ice.
Print it with as hard as material you can, if you can print with diamond material you are golden… or diamond...
Mine is printed with the fuzzy skin modifier to add some extra grip. I used PETG with 100% infill and 4 permitters which made it very sturdy.