Xioami Light Bar Remote Mounting Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Recreation of the twist-lock baseplate for the Xioami light bar wireless remote.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 33
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
I wanted to mount my Xioami light bar remote under my desk without having visible mounting hardware, and without modifying the original baseplate. Luckily it has a simple twist-lock method of attaching that I modeled. This could be modified to add countersunk screw holes for a more permanent solution or just printed as is and VHB taped to something. I did the latter.
The three twist-lock L hooks need to be supported in order for this print to work. I used auto-generated organic supports with 0.1 clearance and they pulled off easily enough with some small needle-nose pliers. Be careful though, the little hooks are fragile and it's easy to snap the whole thing off by accident.
I included the Fusion360 file in case anyone wants this as a starting point for a different mount.
I printed with the following settings:
- Prusa mk4 0.4mm nozzle with input shaping
- Prusament PLA + default profile
- 0.2mm layer height STRUCTURAL preset
- 3 perimeters
- Gyroid infill at 25%
- Auto generated organic supports with 0.1 clearance