Xioami Light Bar Remote Mounting Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recreation of the twist-lock baseplate for the Xioami light bar wireless remote.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to mount my Xioami light bar remote under my desk without having visible mounting hardware, and without modifying the original baseplate. Luckily it has a simple twist-lock method of attaching that I modeled. This could be modified to add countersunk screw holes for a more permanent solution or just printed as is and VHB taped to something. I did the latter.
The three twist-lock L hooks need to be supported in order for this print to work. I used auto-generated organic supports with 0.1 clearance and they pulled off easily enough with some small needle-nose pliers. Be careful though, the little hooks are fragile and it's easy to snap the whole thing off by accident.
I included the Fusion360 file in case anyone wants this as a starting point for a different mount.
I printed with the following settings:
- Prusa mk4 0.4mm nozzle with input shaping
- Prusament PLA + default profile
- 0.2mm layer height STRUCTURAL preset
- 3 perimeters
- Gyroid infill at 25%
- Auto generated organic supports with 0.1 clearance