1 / 4
Print in place flip up optics Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flip covers for dust and water protection of optics, telescopes, scopes, camera lenses etc. print in place with TPU
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 52
- Makes
- 0
- Views
- 524
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These models are meant to be printed in TPU with 3 perimeters and 4-5 top / bottom layers.
If the Flex Material is too soft they may not stay open upright, but it works with the Overture TPU I have. Also if it gets too warm they may become flop down instead.
The "OD" in the filename - the diameter of the tube the ring fits on
OD62 - fits a riflescope with 56 Lens diameter
OD50 - fits a riflescope with 42 Lens diameter
Other diameters will follow.