1 / 3
Ender 5s1 LGXPRO with Revo Six hotend — image 1
1 / 3

Ender 5s1 LGXPRO with Revo Six hotend

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Take that Ender 5s1 one more step further by adding the Bondtech LGX Pro with a revo six

Rating
0 / 5
Likes
8
Downloads
28
Makes
0
Views
675
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is to use the LGX PRO and the Creality Revo Six. I have it installed and testing. The LGX PRO is heavier and larger then the stock extruder.  I went with the pro for a couple reason 1. it can handle higher temps as I have mine fully enclosed and print mostly abs/asa. 2. I have the ercf on my 5s1 using no toolhead sensor. the 5s1 started to not like the collision of the filament against extruder gears.

you will need to print the new fan duct. With the LGX being larger, i had to move the extruder carriage back 5mm, so I adjusted the fan duct to match.

 You will need to go in to the config and adjust the safe home by adding 5mm to the safe home. 

you will notice there is a inset with 2 holes on the front. they are for future additions I'm working on. 1 a filament sensor (testing hall effect vs switch vs optical. lots to test). The a filament cutter using a raspi controlled servo. 

Let me know if you would like any other extruders or hotends. 

Tags