Modern Lamp Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a lamp that can be printed with three styles of base: - None - Straight -Curved (desk or wall mount)
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 34
- Makes
- 0
- Views
- 579
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Its a lamp.
Wall mount for screws on the curved base.
You'll need a 240^3 build volume, 250^3 to fit multiple parts on the same build plate.
Print the Diffuser and Tip out of something somewhat translucent or light colored.
I recommend 4 layer walls on everything, will use around 1600g of filament in total if printed at full size.
Fits <11mm led strips, you need 46mm/18" of strip to fill the core.
Internal cable channel for the power line
Glue together base for the curved one, has tongue in groove fitting
Has two holes to route the cable, one out of the side for on the desk and one out of the front/bottom if wall mounting.
https://www.buymeacoffee.com/godsci