20º Blink Doorbell Camera Wedge Mount (REMIX)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount to attach a Blink doorbell camera at a 20º angle.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 156
- Makes
- 1
- Views
- 1,126
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This wedge sits between the wall and the camera mounting plate to set the doorbell at a 20º angle. You will want to print it in a material that can handle whatever elements you put the camera in, though frankly I've had good success with PLA outdoors. That said, I did mine in PETG-CF.
The other two screw holes are there to use for mounting still, if mounting with the center screw only, you can also use a couple of slightly larger and shorter screws to attache the base to the wedge, giving it a bit more stability.
Note: this is only usable as a right facing mount if you are using the top/bottom holes.