Logitech C920 Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Logitech C920 holder to work inside an Ikea Lack based enclosure.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 35
- Makes
- 0
- Views
- 537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Logitech C920 webcam holder for inside an Ikea Lack enclosure.
It does require taking the camera apart to remove its original stand/mount, that took up too much space inside the enclosure and got in the way of the best angle. It is not too hard to take the camera apart a few screws and it clips apart. Easy to remove the stand and keep it aside should you ever wish to revert to using the C920 as a conventional web cam.
It should mount onto any square corner, uses 2 screws to mount in place,
The camera did not need anything to keep it in place, but i did add holes for pins, but it sits nicely.
No adjustment for the image, but it covers the bed of the printer in this instance quite well.
Supports were needed due to the design, but were easy enough to break off with a screwdriver.