Pop-on Gemstones for ledstrings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sparkling Gemstones printed in Vase Mode all < 1 gram. Simply slide them over existing LED's.
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 56
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Share Alike
Maximum effect with minimum material. Slide them over existing LEDs.
For LEDs with diameter other than 3 or 4.5mm scale the basic models up or down.
Print in PLA or PETG in vase mode and for maximum effect with clear filament..
Average printing time is 5,5 min. (3-8min.)
No support, No Brim, nozzle 0.4, layer height 0.2.
Measuring the led diameter:
Almost all LEDs on LED strings have a tapered diameter of the LEDs themselves. To determine the correct diameter, measure just below the head of the LED (where the shrink tubing of the cable connects to the LED).
The inspiration:
“How to Lose a Guy in 10 Days”…
The printing proces
I used no support and no brim!
Make sure you have good adhesion to the bed..