Bambu Lab P1 Series X-Touch Display mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a minimalist X-Touch Display mount to completely replace the stock P1 Series display.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 59
- Makes
- 0
- Views
- 1,020
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've bought a Bambu Lab P1S. This is a great machine, but the stock display is really awful. I came from a Creality K1 that gave nothing but headaches, but Klipper allowed some fun. Here is too limited. I didn't like the idea that I could not change the fan speed from stock panel, so I've decided to completely replace it.
The goal here was to design something ass small as possible, and the display should be centralized inside the box. The SD card is still accessible. Power was provided from P1S USB to auxiliar input in the board, so the USB is not accessible. The connector for temp sensor is also blocked, because I use a Tuya sensor to measure temperature and humidity inside the printer chamber, but I may design a new version in a near future to allow it.
Maybe I will also release another version directly mounted to the front plate, but this design leaves some space to the stock display cable.