Xiaomi Mi Mix 3 wireless charger stand - no support
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.45 – €5.44 net (excluding VAT)
For file: remixXiaomiCharger.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.95 excluding VAT (range midpoint).
- Weight reported by the author
- 40 g
- Print time reported by the author
- 6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a remix that saves on material used and print time without any support
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 50
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of: https://www.printables.com/model/37678-xiaomi-mi-qi-charger
This model is a stand for the Xiaomi wireless charger that came with my Mi Mix 3.
I saw the potential in the original model and decided to alter it for my taste.
Features:
- I cut off the top half
- The cable hole was moved to the center
- The foot at the back has been opened up and a cable channel was added
- Added angles so it can be printed without any support
Print settings:
- Material: Any
- Layer height: 0.2 mm
- Infill: 15%
- Support: No
- Print it in the downloaded orientation
- I have printed it in PLA in about 6 hours at 60mm/s with a 0.4mm nozzle
I hope you like it! Let me know in the comments 😀
If you wish, you can buy me a coffee ☕
