Xiaomi Mi Mix 3 wireless charger stand - no support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
4,45 € – 5,44 € netto (bez VAT)
Dla pliku: remixXiaomiCharger.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,95 € netto (środek widełek).
- Masa podana przez autora
- 40 g
- Czas druku podany przez autora
- 6 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This is a remix that saves on material used and print time without any support
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of: https://www.printables.com/model/37678-xiaomi-mi-qi-charger
This model is a stand for the Xiaomi wireless charger that came with my Mi Mix 3.
I saw the potential in the original model and decided to alter it for my taste.
Features:
- I cut off the top half
- The cable hole was moved to the center
- The foot at the back has been opened up and a cable channel was added
- Added angles so it can be printed without any support
Print settings:
- Material: Any
- Layer height: 0.2 mm
- Infill: 15%
- Support: No
- Print it in the downloaded orientation
- I have printed it in PLA in about 6 hours at 60mm/s with a 0.4mm nozzle
I hope you like it! Let me know in the comments 😀
If you wish, you can buy me a coffee ☕
