Bluepill case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple sleeve case for bluepill stm32F103 mini dev kit. There is availablesource on-shape url so you can…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 73
- Makes
- 0
- Views
- 471
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a simple sleeve case for bluepill stm32F103 mini dev kit. There is available source on-shape url so you can edit if you like.
The bluepill, at least in my experience, comes in version with 1.2mm and 1.6mm pcb so 2 different STL's are available. You can easily create any pcb thickness you like, just edit the variable (only one available) in the source and export new stl.
Print Settings
Printer:
my own build
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.3
Notes:
you can print this from 0.1mm till 0.35mm layer height and it will work. thinner the layer better the letters on the back come out but I personally print this between 0.3 and 0.35mm, 70mm/sec to get them to print faster as I don't care too much about how it looks as long as it performs the required task. I printed these in ABS but any material should work as long as it's non-conductive.
I print this with brim, so it gets better adhesion to bed since it's small area touching the bed and a tall print and then I leave the brim that closes the "rails" so on one side the slider is kinda closed.. anyhow printing without brim works too.
I print at least 2 of then in the same time to solve the heat accumulation problem
Category: Electronics