1 / 7
Hyper Ergonomic Vertical Foregrip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Super tactile finger fornicating grooves.
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 181
- Makes
- 0
- Views
- 668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Vertical foregrip with ergonomics in mind. Slimmer profile, finger groves and finger stop. Does take up some rail real estate. Print with strength in mind, I usually opt for more walls than infill. Can be printed supportless if your printer is good at bridging. Other wise minimal support needed in the rail section, print upside down.
I went with M4x30mm socket head cap screws, but required screw length is 28.5mm. I also went with heat set insert over hex nuts, just prefer it that way. My inserts were 4mm long from this kit.