Lamp "Winter Wonderland"

Beautiful little lamp for cozy hours in the winter time. Also a lovely Christmas present for your loved ones. 

There are a total of 4 different motifs which, when arranged in the correct order, form a continuous landscape. 

However, the window panes are freely interchangeable, so that you can also use just one or two motifs repeatedly. 

Size

• LxWxH:   approx. 100 x 100 x 100 mm 

Bill of Material

• 4 window panes
• 1 bottom element
• 1 closure cap
• 1 top cover

In addition you will need 

• 1 LED light (diameter up to 7 cm)
  I used this LED light from Amazon, which is equipped with color change and remote control: https://www.amazon.de/dp/B0BVBCDB37?psc=1&ref=ppx_yo2ov_dt_b_product_details
• glue, to glue the top cover on the bottom element

General Print parameters: 

• Layer height: 0.2
• Nozzle: 0,4 mm
• Supports: No
• Brim: No
• Material: tested with PLA

Print parameters for the window panes:

• The window pane is placed on the print bed in a way that the motifs are facing upwards
• Filament change at 3rd or 4th Layer ( >0,4 mm) in case of layer height of 0,2
  
  I used white filament for the frosted glass effect. If you are unsure whether your white filament will show through sufficiently, make a test print to be on the safe side.

Post-printing

After printing, the window panes can simply be pushed into the recesses. 
Afterwards the cover will be carefully fixed at the 4 corners with just a small drop of superglue. 

The uploaded example is printed with PLA filament in white from “Das Filament” and in PLA+ filament in black from Sunlu.

I would be very happy about a make, a like or a comment!

I wish you a Merry Christmas!