Universal Phone Bike Mount - Original Version
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.33 – €5.29 net (excluding VAT)
For file: PLATE_0.12mm_PLA_ENDER3_5h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.81 excluding VAT (range midpoint).
- Weight reported by the author
- 39 g
- Print time reported by the author
- 5.82 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple Phone Mount for my Specialized Crosstrails bike. I wanted something that would attach to the center of the…
- Rating
- 5 / 5
- Likes
- 72
- Downloads
- 393
- Makes
- 4
- Views
- 3,982
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
New & Improved Version - https://www.prusaprinters.org/prints/137100-improved-universal-phone-bike-mount-v2
Simple Phone Mount for my Specialized Crosstrails bike. I wanted something that would attach to the center of the steering wheel and hold my phone stable for navigation.
The only additional hardware needed with this design are the following:
- M3 x 15 MM
- M3 x 35MM (30 works)
Two M3 Nuts I added some electrical tape on the bike for a more snug fit.
My bike has a 35 MM beam with ~20 mm of clearance below it. This only needs 10mm of clearance.
I have attached the design files if you would like to adjust the parameters.
The pieces are calibrated to my Ender 3 Pro meaning that depending on the accuracy of your printer you may have to post process the joints.
If you print this or remix this design, I would love to see your makes and remixes.
-Vedansh
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.12 (w/ Variable Layer Height)
Infill:
35%
Filament:
ESun PLA + Black
Notes:
I would advise using 0.1 to 0.16 layer height with a 0.2 - 0.4 mm nozzle.
You may have to work the threads a couple times to get smooth motion. Feel free to use PTFE grease or wax.
How I Designed This
Blog Link: https://vedanshblog.netlify.app/bike-phone-mount/
Category: Sport & Outdoors