Counting matching models…
Designed to allow for the use of the Specialized SL7 spacers/stem on the 2022 Allez Sprint. It transitions from the round headset to the SL7 spacers with cutouts for internal cable routing. I printed in PETG at .2mm layer height, 100%…
I just bought Garmin Varia radar and was looking for optimal and clean mount. Original mount is okay, but is a little wobble on seat post. It works, but I wanted “peace of mind” mount. I have Specialized bike with SWAT mount holes under…
V2 - jetzt Online Wenn Sie auf der Suche nach einer modernen und praktischen Wandhalterung für Ihr Specialized Ladegerät SBC-C07 sind, dann ist die Halterung die perfekte Lösung für Sie. Die Wandhalterung bietet eine sichere und stabile…
I print with PETG 0.15mm and 100% infilled
Modified the original to fit a slightly larger Garmin quarter-turn insert bought on Aliexpress. The original fits ~32mm diameter insert while this accepts up to ~34mm. The screw holes for the insert are slightly misaligned, although it…
Use TPU with at least two perimeters for the best flexible results. The model is created so that stringing would be minimized.
The female half of a combo mount for bike accessories. Tested and working with Garmin and Specialized accessories. Printed in ABS, plenty flexible for me. Free my models 34f9f4c8744cec4b2c
I don't think the design needs much description. You can mount an AirTag under the orginal Specialized saddles with SWAT mount. I have it mounted with M5x10 screws.
Tested and working, however the fit is very tight. Ideally the cover is reduced slightly to allow an easier fit and removal. Requires 2× M5x15mm bottle cage bolts Printed in PLA on a Bambu Lab X1C
Adapter to mount a Garmin Varia or other to the saddle pin of the Specialized Venge bicycle. Remember support.
I designed this rear mudguard to suit my Specialized Levo Comp Alloy (2022 “Gen 3” model). It also happened to fit my Stumpjumper EVO Comp Alloy (2023 model) nicely as shown in the photos. It's printed as 2 parts, and I recommend printing…
A holder for the Specialized Levo charger, can be screwed to the Wall.
I printed this part on the Bambulabs P1S using 100% infill, supports and in PETG.
Praxis Crank Protection Boot for Specialized Levo, compatible with RaceFace Atlas pedal
Specialized saddle swat Gopro mount For rear light or RADAR I print with PC-CF,over 1000km no problem. ->Mount print with PC-CF broken, about 3000km. Now using with eSUN ePA-CF. Not recomend ABS/ASA,broken with 250km.
The original one broke off so I designed this replacement. Printed in TPU for robustness
Find you having to dig out mud and muck between your frame and the lower part of the rear arm on your Specialized Turbo Levo SL Comp Gen 1 - well here the answer to stop it. Print, fit it and tie it in place with some cable ties
This adaptation features several improvements that make the clamp more secure: the part that goes around a seatpost is shrunk by 1%, the holder part is narrowed down by 1mm and canonical design is added to lower the force exerted on the…
I wanted a different color chainguide for my Specialized Status Moutainbike and quickly found out that specialized uses special hardware to mount the chainguide to the ISCG05 bracket. A few minutes in Fusion360 and I had a model I could…
Specialized Levo Gen 3 charger for wall mounting. Can be printed without supports in orientation shown in slicer. Has integrated cable holders - left for mains cable, right for charger cable. Example shown is ASA, just to help with heat…
What is this thing? I wanted a solution to mount an AirTag on the bike and if possible make it difficult for a thief to see or remove the AirTag. Since my Kenevo Turbo SL had a lot of space directly under the MasterMind TCU, but no real…
I needed a mount to attach a Busch & Mueller LED dynamo powered light to a Specialized Pizza Rack. I didn't find anything suitable online so I designed my own. This uses 2x M5 x 12 SHCS + 2x M5 nuts for the rack clamp, and 1x M5 x 45 SHSC…
Please review, it was designed for someone else i cannot test it. 2025-04-10/No setback model now available no support PA6-CF 3rd iteration
Removes speed limit on Specialized turbo levo SL 2021MY I found the original design fail to work on my Levo SL 2021 MY, so I had to make some improvements. Magnet size increased to 10x3mm, magnet gear changed to incorporate this larger…
Perfect for handlebars with inner diameter of 19.4mm
Specialized TurboLevo 3 Rockguard. Mine is broken again. Testprint in PLA. For me it fits perfectly. Updated to new version adjust holes to size of your screw inserts - print only those parts first to test priint 0.15mm layer for better…
Not printed and tested yet but the dimensions should all be good. I am planning on using a small velcro strap or maybe a short voile strap to keep the tube and compressed air cartridge in there. Category: Sport & Outdoors
A 5mm spacer for the Specialized accessory mount kit, that creates enough space for a Garmin Edge 1050 to fit. Requires replacing the provided 7mm M4 bolt with a 12mm. Threadlock is recommended.
Ich habe hier eine Magnetische Schutzkappe für mein Specialized Ladekabel (Rosenberger Stecker) konstruiert. Die Schutzkappe kann auch an dem Fahrrad montiert werden um die Kontakte vor Dreck oder Regen zu schützen. eingesetzt habe ich 2…
I needed a mount to attach the brake light I got off of Amazon: https://www.amazon.com/dp/B0B4JCX6YN?psc=1&ref=ppx_yo2ov_dt_b_product_details (Victoper Bike Light, High Lumens Super Bright Bicycle Light, 6+4 Modes USB Rechargeable Bike…
A version of the tail light mix specifically for my L508. I printed it in ABS, it needs support and it works great!
Front Mount for Specialized Tactic 4 Helmets See photo for location to put the mount. Printed in PETG or TPU Installed with a tape 3M VHB of 35mm x 17mm
If your bike saddle has these two spare holes on the back of it, it's a great way to discreetly and securely mount an AirTag. As for the screws required, the threads on the saddle are M5. The length optimal length that this model expects…
Remix of https://www.printables.com/model/336439-leg-strap-base-plate-for-k6ark-cw-key-morse-code-p and https://www.printables.com/model/154551-specialized-stix-to-headlamp-adapter to create a strap mount for Specialized Stix bike lights…
This part is required to install fenders/mudguards on my 2023 Diverge Elite E5, but my bike shop did not have the original part (S2099000019) in stock, so I designed my own. Printed in PETG with 40% infill and 4 walls, I have used it now…
I'm not the author, I remix it from a forum. I can't find it now.
When I bought my Gen4 Turbo Levo I couldn't find any wall mounts for the charger to keep it off the floor so here you go. The arms can hold both charger cables if needed. Screws: I used SnapSkru SPM Mini #6 I think, but any smallish screw…
chin mount for specialized gambit helmet. 3m VHB or similar required along with two zip ties. the helmet has a varying rounded faces depending on the size so I made them flat and use the VHB to fill the gap. print in petg or something…
This is an adapter to mount the Exposure rear light on a Specialized saddle using the SWAT™ brass mounts. It keeps the light higher than mounting on the seatpost and is probable more aerodynamic. I mounted it on a Specialized Power Pro…
Halterung für das Specialized Ladegeräte für Wand.
this is a replacement parts of the bumper for Specialized turbo Levo. my original bumper was broken after a crash so i made this version. designed to use the original metal insert printed in TPU no support needed
As covered on CyclingTips.com , this is a small bolt designed to attach a Co2 inflator head to the base of a Specialized SWAT-friendly bottle cage (e.g: Rib Cage II). I have only tested it with a small handful of minimal Co2 inflators and…
I replaced my Fizik bicycle saddle with a Specialized saddle and wanted to reuse my Fizik saddle pack and Cateye lights which are designed to fit the Fizik saddle mount. This adapter provides the rectangular Fizik mount with M5 screw…
Adaptor plate for Bar Fly type Specialized accessory mount (Tarmac, Venge, etc.) to use with Hammerhead Karoo 2. You will need a M4 countersunk 14 mm as the provided 6 mm are too short. Print Settings Printer Brand: Formlabs Printer:…
This is an Apple AirTag holder that can be bolted to the inside of the Specialized SWAT 2.0 door. The door is used on the Diverge and Stumpjumper carbon bicycle frames. As it sits inside the frame, the AirTag is completely invisible from…
I used PETG since this is used in a garage that can get very warm. Version 2 has supports added at the wall plate and charger cradle interface for additional strength. Please share your Make:) Like the freebie? Feel free to buy me a cup…
I bought a used Kenevo mountain bike. One issue was that the chain guide was broken and the spare part was not available. I fixed it myself. You need a M5 threaded insert and you have to cut it to 3mm length. Also a M5x13mm DIN912 Screw…
I've designed this to attach my Specialized Stix taillight to my Tortec Velocity Hybrid pannier rack which has vertical holes 19mm spaced. It is quite short as this is a narrow rack but should fit on any racks which have the vertical…
I was fed up with the original rubber O-ring that was supposed for mounting the Flux rear light to the bike, so i designed my own one. I made a mount for a standard round seatpost-diameter of 27.2mm (tried and tested) and 25.4mm (not…
A cover to keep the dirt off a Specialized Purist water bottle. Easy on/off of the cover while keeping the muck out. Print Settings: Material: TPU 95A Walls/Perimeters: 2 walls w/ .04mm nozzle
I'm an avid cyclist, and my rear light of choice is the Specialized Stix ( https://www.specialized.com/us/en/stix-elite-2-taillight/p/173394?searchText=49120-2100&color=270193-173394 ). These have multiple light modes, are bright, and…
The chain guard for my Specialized COMO SL 5.0 caught on my right pant leg and popped loose. After a closer look at the design, I made a version that extends lower over the front sprocket reducing the likelihood of a catch. In addition,…
This tool is designed to allow the removal of the MoFlo valve in order to clean it. With the valve closed, insert the Removal Tool in the bottom of the valve, aligning the ridges with the rubber tabs. You should feel a gentile pop when…
Specialized Turbo Levo Charger Riser. My Levo is the Aluminum Comp 2023, and I think all the chargers are the same. The charger gets hot when charging and I'm not comfortable with it because floor or table gets hot too, so let's rise it…
I created a Specialized StumpJumper for your Window
Der Schutzdeckel mit eingeklebten Magneten kann auf den Motorstecker meines Specialized Turbo Levo MTB gesetzt werden, wenn das Fahrrad auf einem Gepäckträger transportiert wird. Dadurch sind die empfindlichen Kontakte geschützt, wenn es…
Smaller and more compact charger wall mount for Specialized Turbo Levo or Kenovo eMTB's. May be compatible with other brands and models. Print time is brought down from 10 hours plus with the longer models to a little over 4 hours with…
designed to fit with a saddle bag. required hardware: 2 M3 x 10mm tappered screws 2 M5 x 12mm bolts 1 Garmin Edge disc / insert No supports needed, print top down. 4 files for different angles to accommodate different saddle tilts allows…
A nice Specialized logo keychain that I made from scratch, because I couldn't find one that I liked
You can use for key chain and bottle opener! logo of the famous brand of Spezialized bicycles! I created this for my friend who works in the Specialized! him very happy !! Is only 1 washer M6 12x1.6 fit in with force; no need glue or…
Such a long name to allow to have a Garmin varia on my venge
This is a simple print to place your Specialized SWAT Multitool on a standard bottle cage mount (64mm spacing). There are two versions: plate one has holes for DIN 7991 / ISO 10642 screws and plate two for other ones. Select the…
My first magnet embed print with TPU! It worked just like any other … The heavy-duty (HD) versions are very tight fitting. The magnets really aren't needed as the fit is very secure. The magnet versions are made to insert a pause at 4.2mm…
Doing an unsupported double century (200mi) ride and wanted to bring a larger saddle bag to fit some extra clothes. Sadly the new bag obscured the radar, so I had to get creative. This mounts to a Pavé D shaped seatpost, extends under a…
External Cable Routing guide for 2x 4mm (shifter) and 1x 5mm (brake) bike cables. Modeled to fit a 2012 Specialized Epic Comp, but should fit other models of the same era. Mounts with a 5x20mm socket cap screw on most models. Print with…
I wanted to attach a set of 16L panniers that used the Ortlieb QL3.1 Mounting System to the Specialized Pizza Rack on my bike. I was able to attach QL3.1 system, but the lower mount of of the QL3.1 system the bag too close to the disk…
On Specialized Front Rack & Adventure Plate , the headlight mounts so that it sticks up over the top of the rack, making it difficult to carry anything with a larger footprint than the rack/adventure plate. I designed this adapter to…
This is a bridge to have an extra attachment for a fender on a Specialized Diverge Fact 9R carbon. Use a M4 nut in this model to fix the fender with an M4 screw. Holes for mounting on the frame also M4. I printed it in CPE with 25% infill.
Replacement for broken chain guard on Specialized Hotrock 24. There are 5 attachment points on a ⌀90 mm circle. I attached using cut off wood screws and printed washers from the back.
Specialized power mount for service stand frame 45 mm.
Based on the 120mm model Bike AirTag holder bottle cage by Steve_AU . Printed with PETG
Wanted to add Dropper Post for my bike but didnt have place for all cables
To protect the bike power cable to the battery from damages by the crank, when you transport your bike without a battery. You need a M6 hexagon head screw. I built it for my Specialized Levo Turbo Carbon 2022. Category: Sport & Outdoors
Kettenschutz für Specialized Fahrrad Halter für Kettenschutz:…
Updated 25 June 2024. If you don't like your TPU print quality, I recommend dropping volumetric flow by about 33% — that made great improvements on the finished products for me (forgot I my last print :[).
Specialized Rücklichthalter für SWAT-Montagelöchern https://www.amazon.de/dp/B0D5MCMTJR?ref=ppx_yo2ov_dt_b_fed_asin_title
Da der Easy Clip für meine Insta360 Go3 nicht so richtig an meinem Specialized Tactic 4 Helm halten wollte, hab ich einen kleinen Adapter gemacht, der von unten mit 3M Tape an den Visor geklebt werden kann. Der Halter ist so konstruiert,…
I printed in 0.16 layer PETG+.
Bicycle Chain guard for Specialized, Lightweight,screws: x4 M3 x 15mm flathead tread inserts: x4 M3 x 5.4 x 4.6 x 5.5
These are improved kickstand feet for the center stand on the Specialized Globe Haul ST. This design raises the height of the stand so it's less likely to wobble on uneven terrain, and has a larger surface area than the stock feet so it's…
Those drawers are compatible with the Levytek's Organizer. For CR2450, CR1632, CR2032 and LR44
I bought the Specialized flash front and rear lights but could not find a way to mount this to the fender, so I made this part to do so. The light does not use the band to hold it on but instead snaps into place. When installing it may…
small chainguide for 52mm chainring for specialized epic 8 have to be printed in 80%+ infill used standard bolt with tapered head version for 34 tooth chainring tested (1000+km) version for 30 tooth chainring untested can change add…
This replaces the mount that came with the light. Made for ø22mm handlebars and a zip tie. Print it on its "back". The only flat face of the model. This is also the insertion side for the light. .STL and Fusion .f3d file available for…
This is a bash guard for the Praxis crank arms used on the Specialized Levo gen3 e-mountain bike. This model should also work on any other bike or e-bike using this particular crank-arm. A while ago, I purchased a crank-arm bash guard…
Hose guide to fit Specialized Crux frame and brake hose. May fit other frames. PETG seems like the way to go but whatever. Used a brim. There is a little bit of an overhang on the lip that prints a little messy but it is so small it…
spend Few Days making printing and modifying my own Diamond shape garmin mount for specialzed bikes,seems to be pretty strong,feel free to modify it. only needed you add this mount on your bike is a sram shifter clamp bolt (match maker)…
Das Modell passt nicht ganz perfekt, aber ich denke, es wird funktionieren. Zum einkleben habe ich Sekundenkleber und Aktivator Spray verwendet. Das hat gut funktioniert. Druckeinstellungen: 2 Perimeter 0 Boden- und 0 Toplayer Grid infill…
I recently got a bike that has a Silca Sicuro V2 Titanium Bottle Cage . My previous bike had a Specialized Zee Cage II With Tool , and the tool was really good! (In theory, you can get this tool and its mount separately as a EMT Cage…
Washer required for removing the Taco Blade front derailleur mount on Specialized Camber FSR and Specialized Enduro FSR frames. The Taco Blade is part of the rear suspension triangle linkage and the washer (p/n S165600002) is no longer…
The mount that came with my Specialized Air Tool MTB pump broke, and the pump was always falling out of my pockets. My fatbike only has a single cage mount, so this pump hugs the 31.6mm downtube (OD of 35.5mm). The mount has 2 slots for…
Print the adapter as well two alignment pins. The adapter is designed for the Headset insert to be rotated 45° (do rotate the compressing ring as well!). This allows for easy routing of the Brake lines without any bunching. Since I'm…
replacement spacer for the pivot mounted chain guide on specialized epic mountain bikes running 55mm chainline like on sram transmission cranks.
Custom bottom bracket cable guide designed in Fusion and 3D printed in PETG, 100% infill, for the Specialized Allez. Supports both front and rear derailleur cables and is intended for use with standard shift housing. The front derailleur…
This mount connects directly to the underside of a specialized saddle and allows for direct mounting of a ROCKBROS Bike Tail Light . The design keeps room for other rail mounted hardware like a small gear bag. I wanted to build something…
I printed from PETG and ABS and both seem very durable, PLA will likely be too brittle for this design. I made a narrow version and a thicc version. STEP files are included for you to do with as you please as long as you attribute my…
The latch on the Specialized Stix USB was broken, so I had to replace it. It can be easily secured with a rubber ring, and the USB also comes with a protective cover. Layer height: 0.2mm Materail: PLA, Petg, ABS
A sleek, bolt-on solution to mount your CatEye rear light directly to Specialized or Syncros saddles using their integrated threaded holes. Say goodbye to rubber straps and enjoy a cleaner, more secure, and aerodynamic setup.
