Small Parts Trays with Dividers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Trays that temporarily connect side-by-side and end-to-end to make parts bins for an open area, like a keyboard drawer.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I created these for all of the screws, nuts, washer, radial bearings and other hardware I use in 3D printing.
I have no place in the armoire where I have my printer to put any upright parts cabinets, but there is a pull-out keyboard "drawer" that is an accessible place for parts. So I designed interlinking trays, as shown in the first photo.
I mostly only use the small narrow 6-section boxes, but I have included a couple of wider boxes. To make these interlink with the small box, I have added a connector that fills the gap.
Also included is a model of a small parts scoop, primarily to dump tiny parts like 3mm screws into from sweaty hands. If you try to drop these parts into the trays directly, the parts stick to your hands and scatter. Dump them into this scoop first, then pour them into the tray.