Sliding Gantry for 4040 Extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A housing for 4 x v-slot bearings to work as a sliding gantry.
- Rating
- 0 / 5
- Likes
- 51
- Downloads
- 253
- Makes
- 0
- Views
- 1,430
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial
I fabricated a crane/boom out of 4040 extrusion. I needed a part that housed 4 x v-slot bearings to work as a sliding gantry allowing for straps to be attached. I designed and printed two (2) of these parts and joined them with a length of 3mm aluminum flat bar (as seen in photo).
The model allows for the following fixings:
- 4 x M5 50mm Stainless Hex Bolts were used to attach the v-slot bearings/wheels.
- 4 x M8 Stainless Hex Bolts were used to attach the 3mm aluminum flat bar to each of the two (2) models.
Print Settings
Printer Brand: Bambulabs
Printer: Bambu X1C
Rafts: No
Supports: Yes
Infill: 25%
Filament: BambuLab ABS Black
Notes:
- 0.2mm layer
- 3 walls
- 25% infill
- 25mm outer brim
- Black ABS
About Zij Design
I enjoy designing 3D printable creations and making them available as free downloads.
If you have enjoyed printing one of my creations and are looking for a way to show appreciation then you can simply "buy me a coffee".
Category: Engineering