1 / 5
Servo automated iris - sg90 mod for esphome / Home Assistant — image 1
1 / 5

Servo automated iris - sg90 mod for esphome / Home Assistant

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix for using an ordinary sg90 and control with esphome

Rating
4.25 / 5
Likes
147
Downloads
880
Makes
0
Views
4,453
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Update:

Added .step and fusion360 source files

 

I plan to use this automated iris remix for my prusa enclosure and later to control my air exhaust system from the printers and laser cutter.

Using a 24 teeth spur gear instead of th 12 teeth, allows me to use an ordinary sg90 servo, which in turn, allows me to use esphome to control the servo.

This means I can easily open and close the iris from home assistant ;) on top of a push button to toggle the iris.

Materials needed : 

  • esp32
  • 5  m3 x 5mm
  • Servo SG90 (or similar)

Print:

5 * door_blade_final 
1 * spur-gear-107th-125mo-145at
1 * Spur Gear (24 teeth)
1 * baseplate-aperature-sg90

 

You can use one of the provided esphome examples to control this iris.

Run them with esphome to flash the firmware 

esphome-iris.yaml → this open and closes the iris on a press of the button

esphome-iris-ha.yaml → like above but requires to setup wifi and home assistant connection, allows to open/close the iris from home assistant

wiring for the esphome example provided 

servo signal → esp32:GPIO14
servo + → esp32: +5v (VIN)
servo - → esp32: GND

Button In: esp32:GPIO26
Button Out: esp32:GND

 

 

 

Tags