1 / 4
Double RepRack - DIY Filament Storage x4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of MandicReally design for his spool storage design.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 38
- Makes
- 0
- Views
- 973
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A remix of MandicReally design for his spool storage design. I really liked that he added a .DXF file, so I could easily add an extra step in my design. Sadly, the storage isn't enough. I made the wooden round bars 1 meter long, but even that wasn't enough.
You need:
- 19mm wooden round bar
- 5mm MDF
- 3mm MDF
- 6 small nails
- Laser cutter
You will be most likely not be able to print this thing, because of its height. So this is a part for people with a laser cutter. So if you want to buy a laser cutter, here is one more good reason ;)
If you like to, check out my other designs too!