RCBS ChargeMaster Supreme Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reduce overcharges on the RCBS ChargeMaster Supreme
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 348
- Makes
- 0
- Views
- 1,438
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This insert works similarly to the old straw mod, except without the risk of pushing it too far inside the tube.
The ChargeMaster tube is threaded, which moves the powder forward, but that threading causes extruded powder like Varget to clump easily, which results in overcharges and generally uneven flow rates. This makes the end of the tube smooth, mitigating this issue.
There's a ChargeMaster insert on Thingiverse but it didn't fit my ChargeMaster Supreme so I had to make my own. Unlike the Thingiverse one, this one does not reduce the tube size by as much.
There's also a commercial one available for like $15 (not including tax and ship) but this was like 5 minutes to design and costs like 2 cents to print.
To fit my ChargeMaster, the outer diameter of the insert had to be 0.320".