Sliding Shed Door Bearing Roller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
new bracket that fits into most metal shed slides that can accept a 608 bearing for easier use of the door.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 37
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
How I Designed This ===================
My shed door was difficult to slide...
I have a basic sheet metal shed where the door lays on sliders at the top, and over time the brackets that hold them have worn a flat spot making it more difficult to open
And so i took some measurements
Popped Into Fusion 360
Im not the best with this program, as i only just stared using it around 6 weeks ago. So i do apolagise if my parametric model is a bit back wards
Initial Sketch
My initial sketch was just of the dimensions
Initial Extrusions, The round cylinder is to accept a 608 Bearing, and the holes accept an M3 heat set insert
Cover Plate, with two screw holes aligned to the M3 heat set insert holes
I Designed a new bracket that fits into most metal shed slides that can accept a 608 bearing for easier use of the door.
The STL files should need no reconfiguration in your slicer.
Oh also this is my first ever creation :)
Print Settings
Printer Brand:
Sovol
Printer:
SV07+
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
100
Filament: Creality PLA Black
Notes:
If i were to print again, id probably print in PLA+ or PETG
OPTIONAL:
I used M3 Heat-set inserts in mine, however you could use traditional wood screws providing you have good enough layer adhesion and print in a good orientation.
Category: Replacement Parts