1 / 3
Kusba X Axis Mount for Neptune 4, 4 Pro, and 4 Max
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this to mount on the top front of the hot end to avoid homing interference.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 186
- Makes
- 0
- Views
- 1,632
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I did not search exhaustively, but what I found was a nicely designed mount, but it was situated on the rear of the X Axis carriage and because of it's position X could not be homed while it was installed. I designed this so I can just leave the Kusba on it indefinitely with no interference of normal operation. I used 10mm long 3mm socket cap bolts to mount the assembly in the existing hot end cover bolt holes. I mounted the Kusba with 6mm long 3mm socket cap bolts to the mount to the assembly.