1st Gen 4runner Rear glass regulator piece
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small plastic piece associated with the rear glass regulator locking mechanism
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 50
- Makes
- 0
- Views
- 485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
While installing a new regulator a small plastic piece associated with the rear glass regulator locking mechanism broke. A replacement part could not be sourced and being one piece would be impossible to install without destructive disassembly of the regulator. I designed a replacement part that can be installed with zero disassembly.
Print Instructions:
I used 100% infill on filamentums CPE with a brim and supports set to ‘everywhere’
I think ASA or PC would work for this application but may require some tweaking to print well.
The small screw used is a M2.5 x 0.45 mm Thread, 18 mm Long screw (McMaster-Carr # 91290A053)
No idea how long this part will last. Install at your own risk!