1 / 3
PARKSIDE WET GRINDER (WATER WEEL) SHARPENING JIG — image 1
1 / 3

PARKSIDE WET GRINDER (WATER WEEL) SHARPENING JIG

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Jig for honing plane blades or chisels to a desired angle on a Parkside wet grinding wheel.

Rating
4.5 / 5
Likes
45
Downloads
140
Makes
2
Views
1,201
Reviews
2

Updated at source:

Model information

Category
Tools
License
GNU General Public License v3.0

Tolerances must be tight for a no-wobble fit.
Print 2 nut holders, and fit 2 8mm bolts in there.
Press fit 2 nuts in the plane part (hexagonal holders).
Bolt stiffener to main connector with M3 screw and nut.
Mount jig to water bucket with 2 M3 screws. Take care to allign jig and wheel properly.

Fit sled, should be loose enough to place on top. Hold instrument to be sharpened against the rail, and start sharpening.

Since the wheel is water-cooled, there should be no heat buildup in the sharpened tool.


 

Tags